H&H Menifee Concrete WorksH&H Menifee Concrete Works(951) 574-0417

Concrete floor installation in Menifee CA - a floor built on packed ground

Got a cracked, uneven floor or bare ground waiting on a slab? We dig out, pack the base, pour and plan the cure with you.

Concrete pool deck with a light speckled finish and curved edges surrounding a backyard swimming pool.

What goes into a new concrete floor, and what sets the price?

Concrete floor installation in Menifee means building a slab on packed, firm ground and curing it properly, so the floor stays flat and holds up under whatever you park, store or walk on it.

Most floor calls start with a shop, shed, room addition or garage floor that needs a slab, or an old floor that's cracked, sinking or chipping. I'd rather explain how concrete cracks before the job than after it, and the short version is that we plan for it by cutting control joints, shallow lines sawn into the slab so most cracks follow them instead of wandering wherever they like.

The price turns mostly on the size of the floor, how much digging and base work your ground needs, what the slab has to carry and how close the truck can get, while the schedule turns on the weather and the curing wait after the pour. I write all of that into an estimate that shows each part of the work, and when a job needs a permit, we handle it.

  • Breaking out and hauling off an old cracked, sunken or chipping slab before new work starts.
  • Floors for garages, shops, sheds and room additions, sized to the space you have.
  • Ground prep, forms, the pour, finishing, joint cutting and curing, all written into one estimate.

What happens after you call us about a concrete floor in Menifee?

Here's how a floor job runs with us, from the first call to the walk-through at the end. Each step says who does the work and what you'll have in hand.

  1. Call or send us a note

    Call (951) 574-0417 or use the form, and we'll get back to you to set a time for me to come out. It helps to have the room's size and what the floor will be used for ready.

  2. I measure and write it up

    I come out myself, measure, look at the ground and talk through what the floor has to carry, since soil and loads change from one site to the next. Then I write up an estimate that shows each part of the work, so you can see what's in the price and compare it with other bids.

  3. We prep, pour and finish

    Once you say yes, we take care of any permit steps the job needs and tell you about them before work starts. Then our crew does the ground prep, forming, pouring and finishing, and I'm on site running the work.

  4. We walk the floor together

    When the slab is done, we walk it with you, answer whatever you want to ask and clean up before we leave. Satisfaction guaranteed on every job.

How we handle concrete floor installation

I start with the ground, because a slab can only be as steady as what's under it. We dig out topsoil and soft spots and pack the subgrade, the soil the floor sits on, until it's firm, since dirt that's only raked level settles and takes the concrete down with it. If a budget gets tight, I'd rather you keep the money in the base than in anything on top, because you can redo a surface but you can't fix the ground under a slab without breaking it out. After we pour and finish, we cut the control joints before the slab starts cracking on its own, then start curing, which is the wait while the concrete gains strength instead of drying out too fast. I plan that wait with you up front, since the new floor has to stay covered or coated for a while before you use it, and if tile, wood or vinyl is going on top, we talk about the moisture a new slab gives off as it cures.

A floor job often runs into the concrete around it. If the new floor leaves a doorway a step or two off, we can build concrete steps to match, and if the work carries on out back, we also pour concrete pool decks.

  • Replacing a cracked or sunken floor

    This suits an old slab that's broken, sinking or chipping past the point of patching. We break it out and look at why it failed, which is usually soft or poorly packed ground, so the new floor doesn't sit on the same problem.

  • A garage or shop floor for heavy loads

    This suits a floor that will carry a truck, a loaded workbench or stacked equipment. It usually needs more base work and more steel than a room floor, which adds to the price but helps keep cracks tight.

Get a written estimate for your new concrete floor

Send the form and expect a reply within one business day to set a time for my visit. The on-site estimate is free, with no pressure and no obligation, and it lists each part of the work.

(951) 574-0417

Questions about concrete floors in Menifee

These are the questions I hear most about new concrete floors around Menifee. The answers come from national concrete guidance and state and city rules, told the way I'd explain them standing in your garage.

How much does a concrete floor cost near Menifee?

A reinforced concrete slab in the Riverside area usually costs about $8 to $14 per square foot, before any staining or stamping. That's the going rate in the area, not our price, and the estimate I write up after measuring shows the number for your floor.

Will my new concrete floor crack?

Probably a little, because national concrete guidance says that even with the best design and proper construction, it's unrealistic to expect a floor completely free of cracks and curling, where the edges lift slightly. Well-placed joints control and limit those cracks, so ask each bidder, us included, where the joints will go.

How long does a new concrete floor need to cure?

National concrete guidance says curing should start as soon as possible and last at least 3 days, using a sprayed curing compound or damp burlap kept moist the whole time. Plan for the floor to stay covered or coated through that stretch, because curing is a big part of what makes a slab durable and resistant to cracks.

What is the best way to handle a concrete pour on a hot day?

Plan around the heat, because national concrete guidance warns that hot weather can cause problems delivering, mixing, placing and curing concrete, and those problems can hurt the finished floor. Ask each bidder how they schedule and protect a pour on a hot day, and you'll find we'd rather start early than pour into midday sun.

Do I need rebar in my concrete floor?

One trade publisher's rule of thumb calls for rebar, steel bars that help hold a slab together, or welded wire fabric in a slab more than 5 inches deep, especially one under heavy loads. That's general guidance and not a rule for your floor, so ask your contractor what steel they plan and why.

Does a concrete contractor need a license in Menifee, CA?

For almost any floor job, yes, because the California Contractors State License Board requires a license when a project needs a building permit, uses any additional workers or totals $1,000 or more in labor and materials. The City of Menifee also requires its own business license for contractors who pull permits, so ask to see both, and we're fully licensed and insured.

Concrete floor installation in Menifee and nearby cities

In Menifee, the city's Permit Center takes permit applications, fees and inspection requests, so we check whether the city or the county covers your address and handle any permit your floor needs. We pour floors in Murrieta and Perris too.

(951) 574-0417Get an estimate